User's Manual

Checkpoint Systems, Inc. – Field Service Installation Document – CKP P/N 10073883
Page 4 of 7
Status LED Functions
*Future Release
Reset Button
This button resets the unit and auto-tunes the
antenna under certain conditions. See
Tuning
on page 7.
DMS Setup
Some features of CPiD are able to adjusted / applied without DMS, others are
not. For example, DMS is required to enable the secondary transmitter.
(Click here for FSWP link. Download DMS Version 1.8.95 or later.)
GPIO
The default system configuration has the following GPIO functions:
• GPO – Primary Alarm Relay
• GPI – Disabled
Any other functionality needs require DMS.
Status LED Function Red Yellow Blue Teal White Violet Green
Detection (Tag Alarm) X
Waiting for Interlock X
Keyswitch disabled X
AutoTune Blink
Auto Tune Window
0.5s after
reset is
pressed
Auto Tune Error X
Antenna Overvoltage Blink
Mistuned Blink Blink
Verification Mode X
Mode 4 X*
Mode 5 X*
Mode 6 X*
Factory Default Settings
Blink at
power up