Installation Manual
Table Of Contents
- Statements
- Guide Conventions
- 1
- Background
- F10 System Hardware
- System Diagrams
- Grouping Multiple Antennas
- 2 x 1 Meter Configuration
- 2
- Antenna Distance from Interfering Elements
- System Performance Considerations
- Determining the Electronics Location
- Environmental Considerations
- Site Survey Conclusion
- 3
- Requirements
- Installation Outline
- F10, 1 Meter and 2 Meter Floor Cuts
- Common Wider Floor Cuts
- Mounting the Electronics Enclosure
- Mounting the Power Supply
- Finishing Installation
- 4
- Antenna Wiring
- Wiring the 2 x 1 Meter System
- Overview
- Wiring Between F10 Systems for Sync
- Wiring peripherals
- 5
- System Setup Using DMS
- Application-Based Detection Modes
- Alarm Severity
- Configuring SAM (Smart Alarm Management)
- Updating the System
- 6
- TR4215 Features
- Basic Tuning Methods Using DMS
- Noise Sources
- Analog View
- Evaluate Jumper Positions
- Configuring the System for Asynchronous Noise
- Resonance Sources
- Data Retrieval
- A
- Power Supply Details
- B
- F10 Parts List
- C
- F10 System – Proximity to Deactivation Units
- F10 System – Proximity to Other Systems
- D
- F10, 2 Meter System
- F10, 1 Meter System
F10 Installation Manual Rev.*60 9 of 71
CHAPTER
1
INTRODUCTION
Background
Many retailers are now requiring invisible EAS Systems. The F10 system is Checkpoint’s latest
invisible EAS offering. This product features a unique shielded antenna design based on the
previously released, S10 product. This technology minimizes the impact of in floor noise sources
that plagued previous floor systems.
Offering better immunity to noise, Next Gen Liberty (NGL) TR4215 Electronics are utilized for
F10 systems. It is anticipated that the next generation of Evolve electronics will eventually
replace the NGL electronics for the F10 system; thus the name “Evolve F10.” At this time, this
installation manual reflects installation and tuning for the NGL electronics only.
This manual instructs in the planning, installation and configuration of the EVOLVE F10 System.
Figure 1.1 F10 System Introduction (F10, 2 meter installation shown)