User Manual

Classic IP Style SSB Installation Manual Rev.*60 10 of 27
C H A P T E R
3
PHYSICA L INSTA LLATION
Overview
This chapter covers the physical placement and installation of the TR4210 antennas and power
supply in the following sections:
1. Placement: How to determine the proper placement of the antennas.
2. Power Supply: Information on typical power supply placement.
3. Wire Routing: Information on typical wire routing methods.
4. Antenna Mounting: Antenna mounting information.
Note: For details of placement, refer to Evolve installation manual, CKP P/N 7994249.
Aisle Width
The maximum aisle width for the Classic IP Style SSB antennas (with 410EP tag) is:
 Style Facelift SSB – 2 m [6.6 ft]
System performance is affected by aisle width and tag type. For aisle width details please refer to
the TR4210 Product Reference Guide.
Power Supply
Classic IP Style SSB antennas utilize a +24 VDC power supply.
Placement
The Classic IP Style SSB antenna is designed to install on a standard 6.6 ft. opening. The
minimum distance the chassis box and power supply can be from the antenna is 1.524m [5ft]
while the maximum distance is 8m [26.4ft]. This distance should be taken into consideration when
determining placement of the antenna, although optimal placement will vary from retail site to
retail site.
Placement Requirements:
 The power supply must be within 18m [60ft] of the furthest antenna.
 The power supply must be placed no higher than what is accessible from a store ladder.