User Manual

Classic IP Style SSB Installation Manual Rev.*60 11 of 27
 If mounted in a plenum space, proper plenum rated wiring and plenum rated enclosures
are required.
 The maximum operation temperature should be no more than 40 . ℃
Note: For more information about power supplies, please see “Power Supplies” on Appendix 2.
Antenna Mounting
Antennas are typically not mounted until after the finished flooring is in place.
Mounting Hardware
For mounting on Concrete Floor
Utilize two (2) 1.3cm [.5in.] anchor bolts per antenna.
Figure 2 Anchor Bolt (Concrete Mounting)
Wood Floor
Utilize two (2) 1.3cm [.5in] lag bolts per antenna.
Figure 3 Lag Bolt (Wood Mounting)