User Manual

Classic IP Style SSB Installation Manual Rev.*60 19 of 27
Figure 11 Classic IP Style SSB Antenna Wiring
Chassis Box wiring
Step 1: Open the base cover(s).
Step 2: Cut, strip and terminate the RG59 coax cable, then plug it to the TR4210 board.
Step 3: Connect the SSB1 Lights/Sounder Cable wires to the electronic reader board (TR4210).
Step 4: Connect the SSB2 Lights/Sounder Cable wires to the electronic reader board (TR4210).
For detail connection of Light/Sounder Cable wire , refer to Table 1 SSB Light/Sounder
Cable Wiring Table
Step 5: Connect 24v DC power cable to the VDC power filter and then the output of the filter
board to J18 on the electronic reader board (TR4210).
Step 6: Put the base cover(s) back and secure.