User Manual

Classic IP Style SSB Installation Manual Rev.*60 22 of 27
C H A P T E R
5
ELE C TRONICS S E TTING
Overview
All electronics setting here aimed for on site configurations based on compliance and performance test result, if it
still can not illuminate fundamental noise; please refer to tuning procedure of TR4210.
The Jumper setting for coupler aiming to antenna tuning
Table 3 Coupler Board Jumper Settings
The maximum TX settings allowable for compliance
Table 4 TX setting for compliance
Antenna Type Jumper Settings
Classic IP Style SSB
J8, J11
Region FCC/IC CE
TX Band 8.2 (8.2 MHZ only)
8.2 (8.2
MHZ
only)
Antenna Configuration fw3.61 fw3.61
Classic IP
Style SSB
Dual (master +
sub)
29 29