User's Manual

TAGGING
8
1. Tear a workable amount of tags from the roll.
Each tag on every roll is subjected to Checkpoint’s quality control measures. Sometimes, Checkpoint
tags are produced which do not meet these standards. These tags, which are distributed throughout
the entire roll, are marked with a red ink spot. Customers should keep in mind that these tags may
not alarm the system. Simply discard the tags if you choose not to use them. Please note that each
tray contains 2000 quality tags.
2. Remove the backing paper with thumb and forefinger as
shown.
APPLYING DISPOSABLE TAGS
continued
4. Smooth the edges of the tag with your finger to ensure
that the tag is applied firmly.
3. Place the sticky edge of the tag against a
flat, smooth surface on the item. Guide the
tag onto the item with your thumb.