Installation Guide Part 2

NGL FX Installation Manual Rev. * 39 of 84
Remote voice alarm or alarm post
Connect the peripheral Lights and Sounder wiring as indicated below. Remote voice alarm or
alarm post. White wire connects to the voice alarm.
Figure 32: Ferrite clip installed on ALG SYNC IN (TR4215 Port J22) & ALG SYNC OUT
(TR4215 Port J20) cable
SAB Light/Sounder Cable Wiring Table ***reflect voice alarm or alarm post wiring
Wire Color Primary Antenna (PAB) Secondary Antenna (SAB)
WHITE J41-5 LT+
GREEN J41-4 LT-
RED J54-1 SD+
BLACK J54-2 SD-
Table 1 SAB Light/Sounder Cable Wiring Table