Installation Guide Part 2

NGL FX Installation Manual Rev. * 41 of 84
Wiring 24VDC power supply
A Checkpoint-certified 24VDC power supply can power up to two (2) FX systems. The cable is
plenum rated (MC Armored cable) with AWG18 two (2) conductor cable + ground.
Wire the plenum cable to the DC filter board input according to the Pinout below. Connect the
wires from this PAB’s filter board to J18 connector on the reader. The other output from the filter
board could be wired to other PAB filter board input. *** fix wiring instruction.
Wire Color Description
Black GND
Red +24 V
Table 3 Power Cable Wiring Table
Figure 11 24 VDC Power Supply Cable