Installation Guide Part 2

NGL FX Installation Manual Rev. * 42 of 84
Figure 12 24 VDC power filter
Synchronizing, Slaving and System Proximity
Systems operating together as a unit, as opposed to individual floor systems***, have to be
synchronized or “synced” together using an approved sync cable for the system (i.e., Belden #
8723, Consolidated # 5594, etc.). At minimum there should be a 2 wire and shield. This minimum
wire will not give an alarm group function. For alarm grouping, a 2 pair with shield cable must be
used.
Wiring peripherals
Follow the appropriate installation manual for wiring peripheral devices.