User's Manual

Circulation Circuit Programmer: Programming Circulation Circuits 8-3
 If necessary, launch LabelView if you plan to print labels.
Figure 8.1 Auto-Increment Select
2
Click File > Auto-Increment Format and select the file format specified for your
library. If using only one format file, then you will only perform this step once.
 If you have opted to print labels, click File > Label Format and select the label
designed for your library.
Figure 8.2 Auto-Increment Button
3
Once configured, click the Auto-Increment button.
The Auto-Increment window displays:
Figure 8.3 Typing a starting number
4
Type the starting number and click OK. If have already configured this, the program
remembers the last number programmed so it is necessary to perform this step only
once.