User's Manual

8-4 ILS 2.6 User Guide
The programming window displays:
Figure 8.4 Auto-Increment Programming
5
Options that can be selected by clicking its checkbox:
• Program Continuously: Selecting allows you to continuously program.
• Display Circuit Overwrite Warnings: Select if you wish to see a warning dialog
box when reprogramming a circulation circuit. This feature is useful if you selected
Program Continuously so that you do not inadvertently program a circulation circuit
with another item identifier.
Note: If selected, and you wish to program the circulation circuit, remember to hold the circuit over the
CCP after you click Yes on the warning window.
• Print Labels: Select if you are printing a label for each circulation circuit you
program.
6 Click Program Circuits.
7 Wave the circulation circuit over the CCP. The circulation circuit is read more quickly
if you use and up and down motion over the CCP, instead of waving across the unit.
8 Your circulation circuit is now programmed and ready to be placed in the material. See
“Affixing Circulation Circuits” on page 9-1 for further instructions.
9 Repeat as necessary and as described: