User's Manual

Circulation Circuit Programmer: Programming Circulation Circuits 8-5
• If you selected Program Continuously, just wave the next circulation circuit over
the CCP.
• If not, click Program a Circuit to program the next tag.
Programming Circuits for RFID and Barcode Items
This section provides instructions on how to program items (books, dvds, etc.) that use
circulation circuits and barcodes.
To program RFID circulation circuits using Barcodes:
1 Launch the CCP by clicking Start > All Programs > Circulation Circuit
Programmer.
 If necessary, launch LabelView if you plan to print labels.
Figure 8.5 Barcode Select
2
Click File > Barcode Format and select the file format specified for your library. If
using only one format file, then you will only perform this step once.
 If you have opted to print labels, click File > Label Format and select the label
designed for your library.
Figure 8.6 Barcode Button
3
Once configured, click the Use Existing Barcodes button.
4 Options that can be selected by clicking its checkbox:
• Display Circuit Overwrite Warnings: Select if you wish to see a warning dialog
box when reprogramming a circulation circuit. This feature is useful if you selected