User's Manual

8-8 ILS 2.6 User Guide
3 Double-click Add Printer.
4 Click Next at the initial screen.
5 Select Local printer attached to this computer. Deselect Automatically detect and
install my Plug and Play printer and click Next.
6 Select LPT1: (Recommended Printer Port), if not already selected and click Next.
7 Select Have Disk....
8 Select your CD-ROM drive and navigate to the Windows Driver folder.
9 Click Open.
10 Click OK.
11 Select the type of printer you are installing. The current printer used is the Meto mn
4203 and click Next.
12 Use the supplied Printer Name. Click Next to set the computer to use the Meto printer
as the default printer.
13 Select No to not print a test page. Click Next.
14 Click Finish. Follow the procedures at “Configuring the Print Driver” and
“Configuring the Print Driver Port” sections for further configuration.
Configuring the Print Driver
You need to alter the print driver to use the right label format by accessing the print driver.
1 Select Start > Printers and Faxes.
2 Right-mouse click the printer, Meto mn-4203, and select Printing Preferences.
3 Select the Page Setup tab.
4 Click New. The Edit Stock window appears.
5 Type Checkpoint Label 2.75 x 2.75 into the Name field.
6 Enter 2.75 into both Width and Height fields.
7 Click the Stock tab and select Label Gap from the Label Sensor field.
8 Click OK to save your changes and close the window.
Configuring the Print Driver Port
You need to ensure that the Meto printer is listed first for the LPT1 port.
1 Select Start > Printers and Faxes.
2 Right-mouse click the printer, Meto mn-4203, and select Properties.
3 Select the Ports tab.
4 Verify that LPT1 has the Meto mn-4203 listed first if multiple printers are listed.
5 If not, if the program is not activated, launch LabelView by clicking Start > All
Programs > CheckPoint XLT+ 7.03 > CheckPoint XLT+ 7.03 to start the program.
6 Select File > Select Printer.
7 Click Install.
8 Select the mn-4203 printer in the list of installed printers and click Connect.
9 Redo this procedure to verify that the mn-4203 printer is listed first for the LPT1 port.