User's Manual

9-8 ILS 2.6 User Guide
Applying Circulation Circuits to Audio Material
Use only Standard Circulation Circuits on audio material.
To place Circulation Circuits on Audio Cases with Tapes on Only
One Inside Section:
1 Place the Circulation Circuit on the inside front cover, centered horizontally and
vertically.
2 Place the cover label over the circulation circuit. You can print a barcode as part of the
cover label.
Figure 9.10 Sample Placement of Circulation Circuit and Label on Audio Material
To place Circulation Circuits on Audio Cases with Tapes on Both
Inside Sections:
1 Remove the card stock from the outside sleeve of the front cover.
2 Place the Circulation Circuit in the sleeve, against the box, and replace the card stock
so it covers the Circulation Circuit.
3 If the card stock is metallic, photocopy the card stock, and replace the metallic card
stock with the photocopy.
Applying Circulation Circuits to Kits
Use only Standard Circulation Circuits on kit material.
To place Circulation Circuits on kit material:
1 Place the Circulation Circuit on the outside of the bag, or on the most valuable library
material in the kit.