User's Manual

2-5 Liberty UHX Upgrade Guide
Estimated completion time
Removal of legacy Strata PX pedestal will take approximately 15 minutes per single
pedestal.
Removing bumper posts
Strata PX pedestal may have a bumper post installed on either side of the pedestal to
protect the pedestal from damage. These bumper posts should be removed and the post
holes filled in with concrete. Instead of bumper posts, the new Liberty UHX pedestals are
installed on top of metal risers. The riser elevates the base of the Liberty UHX pedestal off
of the floor to protect it from being damaged.
To remove the existing bumper posts:
1 Checkpoint contractors remove flooring.
2 Checkpoint contractors remove both bumper posts.
3 Checkpoint contractors fill in bumper post holes with concrete.
Estimated completion time
Removal of each bumper post will take approximately 15 minutes plus time for concrete.
This can vary by Checkpoint contractor.