User's Manual
Table Of Contents
5-1 Liberty UHX Upgrade Guide
C HAPTER
C
HAPTER
0
L
IBERTY
UHX AR-400 S
ETUP
I
NSTRUCTIONS
The Liberty UHX AR-400 is configured via the configuration computer after installation
of the Liberty UHX pedestals.
Equipment
• Configuration computer, functional and powered
• Cat5 Cable, 3 ft. or longer
• Liberty UHX Pedestal
• Power Supply, Checkpoint Part No. 7375784
• Power Cord, Checkpoint Part No. 623532
Post-Installation Procedure
1 Connect the Cat5 cable to AR-400 Ethernet port (using the access door).
2 Connect the opposite end of the Cat5 cable to the configuration computers Ethernet
port.
3 Power-up the computer.
4 Change the IP address of the configuration computer to 192.168.0.1.
5 Change the Subnet Mask of the configuration computer to 255.255.0.0.
6 Open Internet Explorer and type HTTP://192.168.127.254 in the address box and then
press Enter.