User's Manual

5-5 Liberty UHX Upgrade Guide
Verification of Power Settings
To verify the power settings, complete the following:
1 Click the Read Point Class link on the left hand navigation bar.
2 Select Area (from class list on the right hand side).
3 Click Select Class.
4 Verify Gain is set to 50%.
5 Verify Retry is set to 1.
6 Verify Air Protocol is set to ALL.
Figure 5.6 Read Point Classes screen
A Gain setting of 50% corresponds to a setting of 256 7 in the ART (Advanced Reader
Test console) program contained in the reader.