User's Manual

Classic Style Installation Manual Rev. *60 16 of 27
Wiring between PSB/SSB
There are only three wires connected between PSB and SSB. They are 1) RG59 coax cable and 2)
SSB Dual color LED cable (22 AWG 4-conductors P/N 7102900 (STP) (5594)) 3) SSB Sounder
cable 2-condutior wire(7045353)
RG59 Coax Cable:
A 13ft long, Two end pre-terminated RG59 coaxial cable is packed with SSB antenna. It connects
the coupler boards (J5) in the primary antenna (PSB) and in the secondary antenna (SSB).
1. Figure 7 RG 59 Coax cable wiring diagram (B) shows the RG59 cable assembly been
completely terminated with ferrite cores clamped on both ends.
1
2
3
1
2
3
3
2
1
13 ft
19mm[3/4in]
25mm[1 in]
12mm[1/2in]
(A)
(B)
Center Conductor
Shield Conductor
3
2
1
Figure 7 RG 59 Coax cable wiring diagram
SSB Light/Sounder Cable
It is recommended to use CKP standard field service truck stock 4-conductor wire P/N 7102900
(AWG22). For the lights the white wire connects LT+ terminal and green wire connects LT-
terminal. For the sounder the red wire connects to SD+ terminal and the black wire connects to the
SD- terminal. The SSB light/sounder cable must mount a cylindrical ferrite at each end in PSB and
SSB. A ferrite core with three turns is attached to each end.
Secondary SSB Light/Sounder Cable Wiring Table
4 conductor wire
Wire Color TR4215
Classic Style SSB
WHITE J42-LTS+ LT Blue
GREEN J41-LTS+ LT Red
RED Filter output+ LT Power +
BLACK Filter output- LT Power -
2 conductor wire
RED J54 SND 2+ SD +
BLACK J54 SND 2- SD -
Table 1 PSB/SSB Light/Sounder Cable Wiring Table