User's Manual

Classic Style Installation Manual Rev. *60 17 of 27
Wiring 24VDC power supply
A Checkpoint certified 24VDC power supply can power up to two (2) PSBs. It is recommended to
wire the 24VDC power suppler to the nearer PSB filter board input, then, connect wire from this
PSB’s filter board to J18 connector on the reader. The other output from the filter board could be
wired to other PSB filter board input. (See Figure 10 24 VDC power filter). 24VDC power cable
uses AWG18 two (2) conductor cable.
Wire Color Description
Black GND
Red +24 V
Table 2 Power Cable Wiring Table
Figure 9 24 VDC Power Supply Cable
Figure 10 24 VDC power filter