User's Manual

Classic Style Installation Manual Rev. *60 20 of 27
Primary antenna (PSB) wiring
Step 1: Open the base cover(s).
Step 2: Connect the RG59 coax cable to J5 of coupler board,. Check the coupler board jumper
settings (see igure 14 PSB Coupler Board Jumper Settings).
Step 3: Connect the SSB dual color LED Cable wires for the Red/Blue lights to the J41/J42 on
the electronic reader board (TR4215), connect dual color LED cable wire for power
supply to filter board output.
Step 4: Connect the SSB Sounder Cable wires to J54 on the electronic reader board (TR4215).
Step 5: Connect 24v DC power cable to the VDC power filter and then the output of the filter
board to J18 on the electronic reader board (TR4215)
Step 6: Inspect wiring and connections, confirm coupler board jumper settings (see igure 14 PSB
Coupler Board Jumper Settings).
Step 7: Put the base cover(s) back and secure.
Figure 14 PSB Coupler Board Jumper Settings