User's Manual

2-4 Source Tagging Tester User Guide
3 If not using email, the SMTP and Email fields can be ignored. Type in the following
information to customize the software for the production line:
4 Once complete, click Save and Exit to save the information. Otherwise, click Exit to
exit without saving your changes.
5 Next, click File > Yield Settings to access Yield Settings.
Figure 2.2 Yield Settings
Table 2.1 User Preferences
Field Description
Time Format Select either Standard or Military time.
Date Format Select the type of date format.
No. of Units Select the number of production lines to be monitored.
SMTP Host If necessary, enter the SMTP Host information. Contact IT for the
information.
SMTP Port If necessary, enter the SMTP Port information. Contact IT for the
information.
Email Address If necessary, type the email address to which the program sends
results.
Shifts Select the time for each shift. You cannot leave more than a 10
minute interval between each shift.
Target Tag Count Type the number of tags that are to be tested for each run. Once the
count has reached the limit specified here, the program stops
counting.