User's Manual

The ILS Inventory Wand
Page 11 of 23
Figure 1-12: Inventory Collection In Progress
1.5. Transferring the Inventory Data Collected
Once you have completed scanning the tags, you are ready to transfer the data.
1. A pop up screen will appear asking you if you want to transfer the data collected. Tap
the OK button to do so.
Note
: If you wish to continue the inventory collection progress after you have pressed Done,
then press Cancel to prevent file transfer and reenter inventory collection mode.
2. (Batch Mode only) Unplug the cable from the bottom of the PPT 2700.
3. (Batch Mode only) Dock the PPT 2700 into the cradle.
4. A Transferring… screen will appear on the PPT 2700 while data is transferring to the ILS
Application Server.
5. Once the transfer is completed, the ILS Application Server will display the Inventory
Wand Operations window. At this time the inventory you transferred is converted to a
text file containing the list of barcodes. The file name and location will be displayed in
the Transfer Status Display window. The file is now ready to be transferred to the
circulation system. When the process is finished click the <Close> button.