User's Manual

The ILS Inventory Wand
Page 18 of 23
Figure 1-19: Shelf Order Alert – Not in List
When a Shelf Order Alert is displayed for an item that is not in shelf order, the barcode, shelf
location, and title will be displayed. The Item Status field will indicate “Out of Range”.
The <Show Prev.> button will display the previous item read. You can tap this button to
display the last item in order to assist in locating the item on the shelf. This item should
probably be repositioned on the shelf, since it was found in the wrong order in the shelf order
list.
The <Show Next> button will display the next item read.
The <Show Item> button returns the display to the item that is not in the list.
The Offset to last item in order field will display the offset value from the last item read in
order. For an alert to occur, this offset is greater than the Offset in use that is displayed.
Tap the Continue button when you are ready to resume the scan. Be sure to start at the
position you were in when the alert occurred.