User's Manual

The ILS Inventory Wand
Page 6 of 23
Figure 1-3: Charging the PPT 2700
2. Insert the PPT 2700 terminal in the cradle.
Figure 1-4: Docking the PPT 2700
3. The Terminal Charge LED turns red to indicate charging, then green when the battery
is fully charged. The terminal's battery is fully charged after approximately 2 1/2 hours.
1.3.3. Charging the Spare Battery
To charge a spare battery, insert the battery in the spare battery-charging slot in the back of
the cradle, oriented so the contacts are facing down and towards the back of the cradle. Press
the battery down into the slot until firmly seated.
The Spare Battery Charge LED turns red to indicate charging, then green when the battery is
fully charged. The battery is fully charged after approximately 2 1/2 hours.