User's Manual

The ILS Inventory Wand
Page 8 of 23
4. Tap on the Power icon on this screen. This will show you the power status of both the
main and the backup batteries. A warning will appear when either battery is low.
Figure 1-7: Battery Status
1.4. Collecting Inventory Data and Scanning Library
Materials
Now that the Inventory Wand has been initialized you are ready to start collecting inventory
information.
1. Connect the cable from the Inventory Wand to the PPT 2700.
Figure 1-8: Connecting Cable to PPT 2700
2. Turn the PPT 2700 on. To do this, press the red button in the lower-left hand corner of
the device.