Product Info

TUNING PROCEDURE TR4022
____________________________________________________________________________________________________________________________
CHECKPOINT SYSTEMS, INC. CONFIDENTIAL AND PROPRIETARY INFORMATION, FOR INTERNAL USE ONLY.
Rev. 00 Page
8
Switch 4 – Bin Elimination, Filters, Transmitter setting and Alarm Cycle
Select
Switch 4-1
Switch 4-2
OFF
OFF
Band Edge Bins
Eliminated
ON
OFF
High Band Bins
Eliminated
OFF
ON
Low Band Bins
Eliminated
ON
ON
Full Band Detect
No Bin Elimination
Switch 4-3
Switch 4-4
OFF
OFF
A FILTER
ON
OFF
B FILTER
OFF
ON
C FILTER
ON
ON
D FILTER
Switch 4-5 OFF –
Software controlled transmitter
feature disabled
ON -
Software controlled transmitter feature
enabled
Switch 4-6 OFF -
Short Alarm cycle
ON –
Long alarm Cycle
Switch 5 – System transmit address, Merchandise/Access Card Rejection
SW 5-3 SW 5-2 SW 5-1 Group
Addressing
OFF OFF OFF Address 0 Strata ‘98 Compatible (200hz, sweep down)
OFF OFF ON Address 1 100 Hz, jitter enabled, random sweep
OFF ON OFF Address 2 100 Hz, jitter enabled, random sweep
OFF ON ON Address 3 100 Hz, jitter enabled, random sweep
ON OFF OFF Address 4 100 Hz, jitter enabled, random sweep
ON OFF ON Address 5 100 Hz, jitter enabled, random sweep
ON ON OFF Address 6 100 Hz, jitter enabled, random sweep
ON ON ON Address 7 100 Hz, jitter disabled, linear sweep down
(Reserved, Engineering mode)
Systems that are ‘slaved’ together MUST have the group addressing switches set to the same
address. Conversely systems that are ‘unslaved’ but in close proximity must have unique
addresses. Address 0 is reserved for compatibility with older (Strata ’98) Strata systems and
should not be used in other installations. Address 7 is reserved for observing the analog input
signal.
SW 5-6 SW 5-5 SW 5-4 ‘Q’ Band
OFF OFF OFF All Tags - No M/A Rejection
OFF OFF ON 410/710 Tags (Merchandise Rejection)
OFF ON OFF 310/Access Card Rejection (Merchandise Rejection)
ON OFF OFF Hard Tags (Merchandise Rejection)
ON ON ON All Tags – (Merchandise Rejection)