User's Manual

OmniVerifier

The Omni Verifier is a portable device that has 3 functions. It is rechargeable and comes with

its own charger cradle.

OmniVerifierwithcard

Function1Testingfora‘live’tag–placein‘PV’mode

•Depressredbuttonandholdoverproduct/tag.

• Greenlightwillilluminateandiflabel/tagis‘live’theOmniVerifierwillsoundandredlight

willilluminate.

*Donotuse theOmniVerifierasa‘bodyscanner’

Function2 Deactivatingalivetag–placein‘PV’mode

•PlacethewhitedeactivationkeyovertheroundpartoftheOmniVerifier .Keepthered

buttondepressed.Thelightsonthedisplaywillcontinuetoflash.Theflashingsignifiesthat

theOmniVerifierisnowindeactivationmode.Byholdingthesaucerclosetoalivetagitwill

beepforacoupleofsecondsthenturnof fthetag.

Function3TestingforDeactivation(testequipmentdaily)

•Switchthesmallblackbuttononthesideofthehandletothe‘DV ’mode(towardshandle).

Thendepresstheredbuttonsothedisplayshowsthered&yellowlight.Nowplacethe

saucerclosetothedeactivator–theOmniVerifierwillbeepifthereisadeactivationsignal.

Please use the Omni Verifier in accordance with store policy.