UHF-RFID Reader WRTZ-2000 User’s Manual 10058016 Last Updated: February 4, 2015 Revision 00 Checkpoint Systems International GmbH Brentanostrasse 27-29 69434 Hirschhorn (06272)928-0 UHF-RFID READER WRTZ-2000
Copyright © 2015 by Checkpoint Systems, Inc. Released February 15 Published by: Checkpoint Systems International GmbH. Brentanostrasse 27-29 69434 Hirschhorn Germany UHF-RFID Reader WRTZ-2000 Users Manual Part Number: 10078784 Trademarks Checkpoint is a registered trademark of Checkpoint Systems, Inc. Other product and company names herein may be trademarks of their respective owners. Other products © or ® their respective manufacturers or copyright holders.
Checkpoint Systems Intern. GmbH Company Confidential Table of contents 1 2 3 4 5 6 7 REVISION CONTROL ...................................................................................... 4 1.1 REVISION HISTORY ....................................................................................... 4 BASIC SAFETY INFORMATION ........................................................................... 5 2.2 NOTE ABOUT THE DISPOSAL OF OLD UNITS ..............................................................
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 1 Revision Control 1.1 Revision History Content changes to this document from its previous version to the current level are indicated by Microsoft Word track changes bars (|) in the left margin of the document unless a complete rewrite is indicated. Accept all tracked changes to the current document before updating it.
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 2 Basic safety information • Read these operating instructions before using the UHF-RFID READER WRTZ2000 for the first time! Make yourself completely familiar with the installation and operation of the UHF-RFID READER WRTZ-2000! Retain these operating instructions for later reference. • The UHF-RFID READER WRTZ-2000 is used for contact less reading of RFID (Radio Frequency Identification) Tags.
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only Industry Canada Approval Note: This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. This device complies with Industry Canada licence-exempt RSS standard(s).
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 3 Introduction UHF-RFID Reader WRTZ-2000 is the electronics system of an Ultra High Frequency (UHF) radio frequency identification (RFID) system (typically called an interrogator or reader) which communicates with targets that are applied to or incorporated into an item. The targets (typically referred to as tags or labels) serve to identify the item to which it is attached based on a unique ID stored on the target.
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 3.1 Installation The UHF-RFID READER WRTZ-2000 is build in a Pedestal System, for the installation guidelines refer to the User Manual 10034763 E10 RF-RFID Pedestal. Block Diagram of Pedestal System with Dual Aisle. TX1/RX2 ANTENNA TX1/RX1 ANTENNA AC/DC ADAPTER 12V DC Pedestal Interped.
Checkpoint Systems Intern. GmbH Company Confidential 4 Technical Data 4.1 Mechanical Data Size : 8.2 x 8.7 x 1.5 in (208 x 221 x 38 mm) Weight: 2.6 lbs (1.
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 4.2 Front view RESET Button DC Connector Power On LED Interpedestal OUT Interpedestal IN LAN Status LED’s 4.3 Side view Digital Inputs RS-232 LAMP CENTER BUZZER LAMP PED1 LAMP PED2 KEY SWITCH 4.
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 4.5 Reader Specifications Power Connection Input Voltage 10,2-13,8 Vdc Input current 2.7 A at 12 Vdc Power Consumption 12W ( typical while idle) 33 W ( typical at 0.5 W conducted RF output power and Lamps driving) The WRTZ-2000 can be powered by suitable AC/DC-Adapter. Usable Power Supply’s - LFZVC60NP12E4, Part Number: 7284242 - AEB70US12, Part Number: 7421850 WRTZ-2000 does not have power switch.
Checkpoint Systems Intern. GmbH Company Confidential 4.7 Digital Input Specification Connector RIACON Part Number: 31182104 (1x4) Input 12 Vdc, 10 mA, Optically Isolated Signals Pin 1 -- +12V Pin 2 – D_IN3 (Digital Input 3) Pin 3 – D_IN4 (Digital Input 4) Pin 4 -- GND 4.8 Interpedestal IN Specification Connector RJ-45 Ethernet 10/100 BaseT Indicators Yellow - Indicates link is operational Green - Indicates network traffic detected.
Checkpoint Systems Intern. GmbH Company Confidential 4.10 Ethernet LAN Specification Connector RJ-45 Ethernet 10/100 BaseT Indicators Yellow - Indicates link is operational Green - Indicates network traffic detected. Signals Pin 1 – TXD+ (Transmit Data +) Pin 2 – TXD- (Transmit Data -) Pin 3 – RXD+ (Receive Data +) Pin 4 – Termination Pin 5 – Termination Pin 6 – RXD- (Receive Data -) Pin 7 – Termination Pin 8 – Termination 4.
Checkpoint Systems Intern. GmbH Company Confidential 4.12 LAMP PED 1 Specification Connector RIACON Part Number: 31182102 (1x2) Signals Pin 1 +11V/200mA Pin 2 GND 4.13 LAMP CENTER Specification Connector RIACON Part Number: 31182102 (1x2) Signals Pin 1 +11V/200mA Pin 2 GND 4.14 LAMP PED 2 Specification Connector RIACON Part Number: 31182102 (1x2) Signals Pin 1 +11V/200mA Pin 2 GND 4.
Checkpoint Systems Intern.
Checkpoint Systems Intern. GmbH Company Confidential For Internal Use Only 6 Glossary RFID Radio Frequency Identification.
