Instructions / Assembly

Slide the tank ring bracket onto the end of the tank ring. Attach the bracket to the rear panel with 2 screws.

Loosen the two screws in the right and left side panel brackets 3 to 4 turns.

Insert the screws through the 2 holes at the base of each side panel and slide the bracket down until it

stops. Attach each bracket to the bottom panel with one 3/16-24 x 1/2 in. screw. Retighten the 4 loosened

screws.

Tank Ring Bracket

Tank Ring

1/4-20 x 5/8ȠScrew

Qty. 2

3/16-24 x 1/2ȠScrew

Qty. 2

Side Panel Bracket