Instructions / Assembly

20
Put the drip cup on the drip cup support.
Cut tie wraps holding regulator underneath grill head control panel. Be careful not to cut igniter wires or the
tie wraps holding the igniter wires in place.
With the aid of an assistant, lift and place grill head onto cart. Grill head sides go over attachment tabs on
cart. Make sure that regulator and igniter wires hangs inside the cart. Attach head to cart with 4 screws as
shown.
Drip Cup
Burner Box
Cabinet
3/16-24 x 1/2ȠScrew
Qty. 4
9
10