Full Product Manual

20
8. For the door (S), insert bottom hinge pin into hole
on bottom panel (P). Push top hinge pin in the
corner of the door to insert into hole in top corner
of the right panel (N). Then, put the drip tray (O)
onto the drip tray support (I).
9. Take the pressure regulator out from under the
burner box (A). Lift the burner box (A) onto the
cabinet, making sure that the gas pressure
regulator is in the cabinet, then position burner
box on the cabinet by aligning the four tabs on
top of the cabinet with the holes in the burner box.
Fasten the burner box to the cabinet with 4
screws (AA).
Hardware Used
3/16-24 x 1/2 in.
Screw
X 4
AA