User's Manual

Built-in Cooking CLEANING YOUR OVEN DOOR (PYROLYTIC MODELS) 33
• Insert the black bordered glass panel into the upper
position, ensuring the painted surface is facing the
downside as per the diagram below..
stirrup in locked
position
door
column
Replacing the top door trim
• Hold the top door trim at each side and position it to the
inside edge of the glass.
• Push the trim down with its top edge over the glass panel
until the clip snap in on each side of the trim.
• Push the middle of the trim down to ensure it is straight
and firm against the glass panel.
stirrup in locked
position
door
column
Fitting the oven door
• Take hold of the oven door with a hand on each side and
with the door at an angle of 30˚, position the recesses at
the bottom of the door onto the hinge arms of the oven.
Let the door slide down the hinge arms as far as it will go.
stirrup in locked
position
door
column
• Open the door fully to access the hinges.
• Rotate the ‘stirrups’ (see the image below) until
they lock into the hook. The oven door may now
be closed.
stirrup in locked
position
door
column