User's Manual

ManualsBrandsChef ManualsAll Ovens60cm Electric Built-In Oven with Easy Pyro Clean

Built-in Cooking OPERATING THE PROGRAMMABLE CLOCK 13

Setting the delayed start cooking time

• Set the cook time and end time as described in

the previous sections.

• Once both the cook time and end time have been set, the

cook time and the end time ‘indicators’ will stop ﬂashing

and the current time of day will be displayed.

• To stop beeper, press any button.

To check or cancel settings

• To check your settings, press the mode button until the

indicator you want is ﬂashing.

• To cancel “delayed start” press the mode button until

“end time”

symbol starts ﬂashing. Press and hold the

button until the clock no longer reverses (you will hear

a beep). If you have left the temperature and function

knobs at a setting the oven will start once the “end time”

indicator stops ﬂashing.

• To cancel “auto shut off” press the mode button until

“cook time”

indicator starts ﬂashing. Press and hold

the

button until the clock no longer reverses (at 0:00

you will hear a beep). This automatically cancels “delayed

start”. If you have left the temperature and function knobs

at a setting, the oven will start once the “cook time”

indicator stops ﬂashing. Because you have cancelled

“auto off” the oven will continue to heat until you manually

turn it off.

On completion of cooking

• The heat source will turn off, the timer will beep and the

end time and/or cook time ‘indicators’ will ﬂash.

• Even though the heating element turns off, the oven will

still retain substantial heat. This will continue to cook the

food until it is removed or the oven cools down. If you do

not plan on being present when the oven turns off, you

should take this extra heating time into account.

• Turn the function and temperature controls to the off

position.

• Press any button to stop the timer beeping.

Adjusting the clock

• Press the MODE button until the clock ‘indicator’

begins ﬂashing.

• Press the

or buttons to change the time of day.

5 seconds after the last change, the clock ‘indicator’

will disappear, conﬁrming the time has been adjusted.

5 BUTTON PROGRAMMABLE CLOCK

(CVEP614)

General features

The oven is equipped with an electronic clock that can be

used to turn the oven on and off automatically. The COOK

TIME function automatically turns the oven off after a set

amount of time. The END TIME function is used to set the

time of day you want the cooking cycle to ﬁnish. A “Delayed

start” is possible by combining the COOK TIME and END

TIME features to switch the oven on and off at a speciﬁc time

during the day.

Setting the time of day (after electrical connection):

1. After the appliance has been electrically connected, “12”

and the “Set Clock” symbol

will ﬂash.

2. To set the time of day “Hours” press the

or buttons

while the “Set Clock” symbol

is ﬂashing.

3. Press the CLOCK button and the time of day “Minutes”

will ﬂash and can be set in the same manner.

4. After 5 seconds from the last change, the clock display

will stop ﬂashing, conﬁrming the time is set.

NOTE: The clock has a 24-hour display.

Changing the time of day

1. Press CLOCK button until the “Set clock” symbol

begins to ﬂash on the clock display.