Ceramic Cooktops User and Installation Manual MODELS CHC644BA, CHC744BA, CHC944BA, SHC644BA, SHC944BA
CONGRATULATIONS Congratulations and thank you for choosing our Ceramic Cooktop. We are sure you will find your new appliance a pleasure to use and a great asset to your cooking. Before you use the appliance, we recommend that you read through the whole user manual which provides a description of the product and its functions.
general safety Please comply with these instructions. If you do not, any damage resulting is not covered by the warranty. General safety • This appliance may only be installed and connected by trained, registered service engineers. • Built-in appliances may only be used after they have built-in units and work surfaces that meet standards.
description Cooking surface layout CHC644BA / CHC744BA / SHC644BA 2 1 Hob cooking zone control knobs 1 2 3 4 3 4 CHC944BA / SHC944BA 2 3 1 4 Residual heat indicator 4 DESCRIPTION Ceramic Cooktops 1 2 3 4 Hob cooking zone control
description operating the appliance Control knobs The cooking power can be set anywhere between level LO and HI. LO Lowest power HI Higest O Off position Residual heat indicator The residual heat indicator lights up, as soon as the corresponding zone is hot. WARNING warning Risk of burns from residual heat. After being switched off, the cooking zones need some time to cool down. Look at the residual heat indicator.
cooking and frying energy saving tips& & information TIPS INFORMATION According to the latest scientific knowledge, intensive browning of food, especially in products containing starch, can constitue a health risk due to acrylamides. Therefore we recommend cooking at the lowest possible temperatures and not browing foods to much. environmental ENVIRONMENTAL TIPS tips Always place cookware on the coking zone before it is switched on. If possible, always place lids on the pans.
cleaning and care WARNING warning Risk of burns from residual heat. WARNING warning Sharp objects and abrasive cleaning materials will damage the appliance. Clean with water and washing up liquid. Removing deposits 1. Place a scraper on the glass ceramic surface at an angle. 2. Remove residues by sliding the blade over the surface. 3. Wipe the appliance with a damp cloth and a little washing up liquid. 4. Rub the appliance dry using a clean cloth.
troubleshooting PROBLEM The cooking zones are not functioning. The residual heat indicator is not displaying anything. disposal POSSIBLE CAUSE REMEDY The desired heat setting is not set. Set the heat setting. The fuse in the house’s electrical wiring (fuse box) has been tripped. Check the fuse. If the fuses trip a number of times, please call an authroised electrician. The cooking zone was only on for a short time and is therefore not hot.
technical data MODEL CHC644BA / SHC644BA CHC744BA CHC944BA / SHC944BA PNC 949 163 312 / 949 163 317 949 163 313 949 163 314 / 949 163 316 Product dimensions (w x d) mm 610 x 515 700 x 520 930 x 520 Cut-out dimenisons (w x d) mm 560 x 490 (485) 560 x 490 (485) 880 x 490 (485) Voltage (volts) 230 230 230 Cycles (Hz) 50 50 50 Service cord not fitted not fitted Elements No. zones Watts No. zones Watts No.
installation electrical connection Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with he regulations, etc.) Before connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds to the available supply voltage. Installation may only be carried out by a qualified electrician.
assembly min.
assembly CHC644BA / CHC744BA / SHC644BA 60 0 1 0+ 56 49 0+ 1 R5 12 ASSEMBLY Ceramic Cooktops
assembly CHC944BA / SHC944BA 60 0 1 0+ 88 49 0+ 1 R5 Ceramic Cooktops ASSEMBLY 13
assembly Installation above cupboards or drawers Under hob access must be restricted by the addition of a board mounted at least 20mm from underside of hob. min. 25mm min. 20mm Installation above cupboards or drawers Under hob access must be mounted at least 20mm from top of appliance. min. 25mm min.
rating plates ~ 220 - 240V ~ 220 - 240V ~ 220 - 240V ~ 220 - 240V 6.0kW ~ 220 - 240V 6.5kW PNC:949163312 Made in China MODEL: CHC644BA APP NO. : PEE2 100 50Hz S NO.: 6.0kW (240)949163312(21)55108532 PNC:949163313 Made in China MODEL: CHC744BA APP NO. : PEE2 100 50Hz S NO.: 6.0kW (240)949163313(21)55108537 PNC:949163314 Made in China MODEL: CHC944BA APP NO. : PEE2 101 50Hz S NO.: 6.5kW (240)949163314(21)55108542 PNC:949163317 Made in China MODEL: SHC644BA APP NO.
notes 16 NOTES Ceramic Cooktops
notes Ceramic Cooktops NOTES 17
notes 18 NOTES Ceramic Cooktops
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: BUILT-IN OVEN, COOKTOP AND FREESTANDING COOKERS This document sets out the terms and conditions of the product warranties for Electrolux Appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Appliance. 1.
like to know more? For further information on all appliances, or to obtain detailed dimension and installation information, call into your Retailer, phone or email our Customer Care team or visit our website: Australia phone:................................................... 1300 363 640 fax:....................................................... 1800 350 067 email:.............................. customercare@electrolux.com.au website...................................... chef.com.au (Chef models) .........
