User Guide

MODEL: RJ39-WIFI

BEFORE FIRST USE

Remove all packing materials from the Sous Vide Cooker. Gently wipe down exterior with a

damp cloth or paper towel. Never immerse the top of the Sous Vide Cooker touch screen, cord

or plug in water or any other liquids. The electrical connections, control dial and screen must

never come into contact with water or any other liquids.

Read all instructions and follow them carefully.

HOW TO USE

1. Prepare food by seasoning it and placing each item in its own sealable plastic bag or vacuum

sealed bag. Set aside.

NOTE: Foods cook best when all parts of the food are in contact with the water. Place foods

in their own sealable bags, or vacuum seal multiple pieces while leaving a border of empty

space around each piece. Small items, like vegetables, may be placed in the same plastic bag,

but it is best to spread them in a single layer and vacuum seal them.

Tip: Vacuum sealing your food is recommended when using your Sous Vide Cooker for more

than eight hours.

2. Fill a large pot or heat-proof container with lukewarm water. Ensure that the pot or

heat-proof container is deep enough for the Sous Vide Cooker to securely clamp onto the

side. Place the ﬁlled pot or heat-proof container near an electrical outlet.

NOTE: The Sous Vide Cooker can heat up to 16 quarts of water.

3. Insert the base of the Sous Vide Cooker into the water. Ensure that the water level is above

the MIN water level line and below the MAX water level line.

4. Clamp the Sous Vide Cooker onto the side of the pot or heat-proof container.

5. Plug in the Sous Vide Cooker. The live temperature, which is the current temperature of the

water, and default set temperature of the water will display on the screen. The default set

temperature will blink, indicating that it may be changed.

6. Set the temperature* by using the control dial to select the desired temperature.

NOTE: The temperature may be adjusted at any time during the cooking process.

*The temperature may be changed from Fahrenheit to Celsius: While the set temperature

is blinking, press down the START/STOP button until hearing a beep sound, release the

button immediately, then °C or °F will appear on the screen.

NOTE: When changing the temperature from Fahrenheit to Celsius, do NOT press the

START/STOP button for more than 10 seconds. It may cause the program to malfunction.

OPERATING INSTRUCTIONS