User Guide

5
MODEL: RJ11-17-GP
Operating Instructions
MAKING TEA
SET UP
1. Remove tea infuser from kettle by grasping the tea infuser handle and lifting up.
2. Add fresh, cold water to the kettle, filling it for the number of cups of tea you wish to
make—up to 4 cups (max fill for tea is 1 Liter).
3. Insert tea infuser into the kettle and ensure it is securely in place.
HEATING WATER
1. Make sure the kettle is securely on the base. Turn unit on by pressing the ON/OFF
button. Red indicator light will turn on.
2. Press PROG button, blue indicator light will turn. Then press TEMP buttons and
select temperature for the type of tea you are steeping (see chart on page 10).
3. Once the LCD display stops flashing the selected temperature has been set.
NOTE: The water will automatically maintain the selected temperature for
60 minutes or until the kettle is turned off.
4. To adjust the temperature setting simply press the PROG button and reset to
desired temperature.
STEEPING TEA
1. Once desired temperature appears in LCD display, open lid and carefully add tea
leaves or tea bags to the tea infuser. Securely close the lid.
2. Allow tea to steep for the reccommended amount of time according to the type of
tea you desire (see chart on page 10).
3. Once tea has finished steeping lift the kettle off the base to serve. NOTE: When
kettle is off base, the LCD display will show "ER" indicating the unit is paused.
4. When kettle is returned to base, the Keep Warm cycle will pick up right where it left
off. NOTE: To turn the unit off at any time, press the ON/OFF button. Last selected
temperature setting will remain in the unit's memory until the unit is unplugged.
ICED TEA
1. Follow direction for "Heating Water" on page 5.
2. Once desired temperature appears in LCD display, open lid and carefully add tea
leaves or tea bags to the tea infuser.