User Guide

5
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
USING YOUR WINE OPENER FOR THE FIRST TIME
Before you use this product for the first time, please take a few moments to read
these instructions and keep it for reference.
TO OPERATE YOUR ELECTRIC WINE OPENER
We recommend that you charge your electric wine opener for at least eight hours
before using it for the first time. Please follow the instructions for recharging below:
Recharging your electric wine opener. Plug one end of the adaptor cord into the
base of the charging base and the other end into a main socket. Place the electric
wine opener into charging base ensuring that it is firmly in position and that it is
fully engaged with the recharging connection.It will take appoximately 8 hours to
recharge your electric wine opener ,it can use be used to open approximately
30 bottles at least when fully recharged.
1. Before removing the cork you must remove any foil from the
bottle using the cutter provided (see fig.1)
2. Place the electric wine opener on top of the wine bottle making
sure that it remains as upright as possible at all times. If you
hold the electric wine opener at an angle to the bottle it will not
remove the cork properly. (see fig.2)
3. Hold the electric wine opener firmly and press the pull button,
the corkscrew spiral will turn in a clockwise direction and enter
the cork ,then gradually remove it from the bottle. When the
electric wine opener mechanism stops the cork has been fully
removed from the bottle.
4. Lift the electric wine opener away from the bottle. To remove
the work simply press the release button and the spiral will
turn in an counterclockwise direction and release the cork.
FIGURE 1
FIGURE 2
OPERATING INSTRUCTIONS