User Guide

7
MODEL: RJ39
Changing the Settings During the Cooking Process
Temperature change:
a. If you press “PLAY” it will pause the cooking cycle and the digits on the “SET” display
will blink.
b. Once the display is blinking, simply using the scroller to change the temperature and
press play to restart.
Time change:
a. If you press the “TIME” button when cooking, it will pause the cooking cycle. You can
now change the countdown timer on the “SET” display. First the “Hour” digits blink-
enter the new cooking time then press timer again and you can change the “Minutes”
digits.
Delay Function:
If you want to delay the start time to begin sous vide at a later time.
Entering The Time Value
1. Plug in your sous vide.
2. “SET” display is blinking to indicate that you are ready to put in a cooking setting.
3. Press and hold the “TIME” button. This will start the “DELAY MODE”.
4. The “DELAY” indicator light will be displayed and start blinking.
5. The left two digits of the “SET” display will start to blink. Scroll to the number of
hours for which you would like to delay.
6. Press the “TIME” button.
7. The hours are set now the right two digits will blink. This indicates you need to enter
the number of minutes you would like to delay. Scroll to reach the number of minutes
for the delay.
8. Press the “TIME” button. The minutes are set and the “DELAY” light indicator will
remain lit and not blink.
Entering the Temperature Value
1. The “SET” display will be blinking indicating that you can now change the
temperature “TEMP” setting.
2. Use the scroller to put in the temperature value. Now you can press the “PLAY”
button to start the delay.
3. The “LIVE” display will toggle between countdown time and the actual temperature
in the water.
4. Once the delayed time has completed the unit will begin to Preheat “PRE".
OPERATING INSTRUCTIONS