User`s guide

Chapter IX. FCoE Full Offload Initiator

v. Save the Configuration

switch#copy running-config startup-config

4.2. FCoE fabric discovery verification

The verification is done 

4.2.1. Verifying the DCBX parameters

To verify the current DCBX information being exchanged, execute the below commands using

cxgbtool.

i. First step is to find the adapter number. Find it using the following command

[root@host]# cxgbtool stor –s

ii. Now execute the following command to check the DCBX information.

[root@host]# cxgbtool stor –a <adapter_no> --dcb-params