User`s guide

Chapter I. Chelsio Unified Wire

iv. Follow steps (v) to (xv) mentioned in the previous section.

3.2.2. CLI mode (without Dialog utility)

If your system does not have Dialog or you choose not to install it, follow the steps mentioned

below to install the Unified Wire package:

i. Download the tarball ChelsioUwire-x.x.x.x.tar.gz from Chelsio Download Center,

http://service.chelsio.com/

ii. Untar the tarball using the following command:

[root@host]# tar -zxvfm ChelsioUwire-x.x.x.x.tar.gz

iii. Run the following script to start the installer:

[root@host]# ./install.py

iv.  installation without the

Dialog utility.

v. End User License Agreement; 

installation menu. Press the EULA and start the installation 

and and exit from the installer.

vi. Enter the number corresponding to the T4 Configuration option in the Input field and press

Enter. The selected components will now be installed.

vii. After successful installation you can press 1 to view the installation log. Press any other key

to exit from the installer.