User`s guide

Chapter VII. iSCSI PDU Offload Target
Chelsio T5/T4 Unified Wire For Linux Page 107
[root@host]# chinfotool
Scanning System for network devices....
License key will be tied to any of the following interfaces.
Please select the interface
1. Interface eth1 with INTEL Adapter
Linkspeed is 1000 Mbps/s MAC is: 00:30:48:00:00:10.
2. Interface eth2 with CHELSIO Adapter
Linkspeed is 10000 Mbps/s MAC is: 00:07:43:00:00:10.
ENTER NUMBER:2
*******************************************************
SUMMARY:
Interface with MAC Address 00:07:43:00:00:10 (10000 Mbps) is selected
Please send info file "/etc/xyz_chelsio_infofile" to Chelsio Communications
at [e-mail]
Chelsio Support will send back the keyfile.
The keyfile unlocks the software as long as the above interface is present
*******************************************************
The generated file hostname_chelsio_infofile needs to be sent to Chelsio at
[e-mail] as instructed by the chinfotool.
2. Install the license file received from Chelsio
Once the information file (generated by chinfotool in the previous step) is processed by
Chelsio, the user will receive a license file tailored to the system. Copy the file to
/etc/chelsio-iscsi/chiscsi.key.
[root@host]# cp -f chiscsi.key /etc/chelsio-iscsi/chiscsi.key
The iSCSI software is now unlocked and is ready to be configured and used.
Note
Please be sure that the selected NIC Adapter is present in the system at all
times when using Chelsio’s iSCSI software. If it is removed the license will be
invalid and the process of obtaining a new license file will need to be restarted.
That includes using chinfotool to rescan the system and obtaining a new
keyfile from Chelsio support.