User`s guide

Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire For Linux Page 15
 uname_r: This file is used by chstatus script to verify if the Linux platform is
supported or not.
 wdload: UDP acceleration tool.
 wdunload: Used to unload all the loaded Chelsio drivers.
Uboot: There are two sub-directories in the Uboot directory: optionROM and LinuxDUD.
The Uboot directory contains Unified Boot Option ROM images and a Legacy Flash Utility,
which can be used to flash Unified Boot Option ROM onto Chelsio's T5 and T4 Converged
Network Adapters (CNAs). It also contains T5 and T4 Firmware and configuration files.
The LinuxDUD directory contains image (.img) files required to update drivers for Linux
(RHEL and SLES) distributions.
1.4.2. RPM package
The Chelsio Unified Wire RPM package consists of the following:
docs: The docs directory contains support documents i.e. README, Release Notes and
User’s Guide (this document) for the software.
scripts: Support scripts used by the Unified Wire Installer.
DRIVER-RPMS: RPM packages of Chelsio drivers.
OFED-RPMS: OFED RPM packages required to install iWARP driver.
install.py: Python script that installs the RPM package. See Software/Driver Installation
section for more information.
uninstall.py: Python script that uninstalls the RPM package. See Software/Driver
Uninstallation section for more information.
EULA: Chelsio’s End User License Agreement.