User`s guide

Chapter I. Chelsio Unified Wire
Chelsio T5/T4 Unified Wire For Linux Page 23
x. Under “Choose install components”, select “all” to install all the related components for the
option chosen in step (ix) or select “custom” to install specific components.
xi. Select the required performance tuning option.
a. Enable Binding IRQs to CPUs: Bind MSI-X interrupts to different CPUs and disable
IRQ balance daemon.
b. Retain IRQ balance daemon: Bind MSI-X interrupts to different CPUs and do not
disable IRQ balance daemon.
c. TX-Coalasce: Write tx_coal=2 to modprobe.d/conf.
For more information on the Performance tuning options, please refer to the
Software/Driver Configuration and Fine-tuning section of the Network
(NIC/TOE) chapter.
Note
To install Bypass driver, please select Unified Wire with FCoE Initiator in step
(ix). Then select “custom” option.
Important