User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 231
4.2. Verifying Management Client
Execute the following query command to determine if Management Client is installed:
[root@host]# chelsio_uwcli -V
The above query should confirm that Management Client is installed by displaying a similar
result:
Unified Manager client CLI version : 2.x.yy
4.3. Verifying Management Station
Execute the following query command to determine the status of Management Station:
[root@host]# /etc/init.d/chelsio-mgmtstd status
The above command will display one of the following messages:
UM Management Station: Running
UM Management Station: Stopped
Based on the status displayed, you can start, stop or restart Management Station by executing
the following command:
[root@host]# /etc/init.d/chelsio-mgmtstd [start|stop|restart]
While accessing the Web Management Interface, if an error “Management
Station is not running” is displayed at the log-in page, follow the above steps to
restart Management Station and try again.
Note