User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 241
Service Discovery
Using this module, all the Unified Wire Manager agents connected in the same or different
subnet can be discovered. One can choose to discover agents based on OS type (Linux,
Windows, FreeBSD or All) or search for a particular agent if the agent's IP is known by using the
Choose the HostIP option. The Add Agents button adds the selected system to the list of
discovered agents in the Bookmarks and History module. The Clear Agents button resets the
list of discovered agents.
Figure 7.4.1 (b) - Service Discovery module
Bulk Driver Installation
This module allows you to install drivers for multiple systems simultaneously. Drivers available
for installation for a particular system may differ depending on the network card (T3 or T4)
selected and the operating system (Linux, Windows, ESX, Macintosh, Solaris, FreeBSD)
selected.
 Installing Driver
1. In the Choose the card fields, select T3 or T4 depending on the chip revision of the network
card.
2. Select the operating system for which drivers are to be installed in the Choose the OS Type
field. All the systems with the selected operating system will be displayed in the list below.