User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 257
7.5.6. Unified Wire Manager Component Versions
A list of the Unified Wire Manager agent components installed on the managed system is shown
in this module. The versions of the components are useful in case of reporting an issue to
support.
Figure 7.5.6 - Unified Wire Manager Component Versions module
7.5.7. KVM Configuration (Linux)
This module allows you to enable or disable KVM related operations. Once enabled, two related
modules, VM Configurations and VF Configurations, will be available and you can manage
VMs and related settings. While enabling, you will have to provide the number of Virtual
Functions (VFs) you want to create for the physical ports.
The KVM Configuation module will be available only when Chelsio Network driver (cxgb4) and
KVM modules (kvm and kvm_intel/kvm_amd) are loaded. If not done already, access Agent CLI
and follow these steps to do so:
i. If any or all the aforementioned drivers are already loaded, unload them before
proceeding:
[root@host]# rmmod <kvm_intel/kvm_amd>
[root@host]# rmmod kvm
[root@host]# rmmod cxgb4