User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 258
ii. Next, reload them using modprobe:
[root@host]# modprobe kvm allow_unsafe_assigned_interrupts=1
[root@host]# modprobe <kvm_intel/kvm_amd>
[root@host]# modprobe cxgb4
Loading the kvm module with allow_unsafe_assigned_interrupts=1 option enables use of device
assignment without interrupt remapping support. This is required in order to asssign VFs to
VMs.
iii. Finally, access WebGUI. Remove the Agent using the “Remove System” button and
connect to it again from the Bookmarks and History module. You should now be able
to see the KVM Configuration module.
Figure 7.5.7 (a) – KVM Configuration module
Figure 7.5.7 (b) – KVM Configuration module: Adding Virtual Functions
7.5.8. VM Configurations (Linux)
The VM Configurations module allows you to view UUID and domain state of Virtual Machines.
You can perform various system power options like start or resume (if VM is paused), turn off,
restart or suspend (pause) a VM.