User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 265
TCP Offload settings (Linux & FreeBSD)
The TCP offload settings applicable to the card are shown here. These settings are only
available when using the TOE capable drivers (t3_tom and toecore for T3 adapters; t4_tom and
toecore for T4 and T5 adapters). On changing the settings, the changed settings may not reflect
immediately on refreshing the data. Highlight the system item in the tree menu on the left, and
click Refresh, to refresh data from the system, in case the updated settings are not being
shown.
Figure 7.6.2 (b) – TCP Offload Settings module for a Linux Agent