User`s guide

XVII. Unified Wire Manager (UM)
Chelsio T5/T4 Unified Wire For Linux Page 279
Figure 7.6.3.1 (b) – Bridge Configuration module (Linux)
Virtual Network Configuration (Linux)
Using the Virtual Network Configuration module, you can create network bridges and attach
them to virtual machines. You can also assign physical interfaces on the host to bridges.
To create a bridge, enter a name and click “Create” in the “Create Bridge” section. All other
parameters are optional. If not specified, the bridge will be created with default values. Except
STP and Priority, you can change all of the other parameters in the Bridge Configuration
module once the bridge is created.
Use the “Add Bridge to VM” section to attach a bridge to a virtual machine.
To assign interfaces on the host to a bridge, specify the bridge name and the host interface in
the “Add Interface to Bridge” section. Click “Add”. You can add multiple interfaces to the same
bridge using the aforementioned method. The Cost and Priority parameters are optional.